Fix: LG Monitor No Signal (Step By Step)

About The Article:

  • The “No Signal” error on LG monitors indicates no video input is detected.
  • The article covers potential causes like loose cables, wrong input selection, driver issues.
  • Step-by-step troubleshooting is provided to diagnose and resolve the LG no signal problem.
  • Instructions are given to check connections, cables, input sources to fix the no signal error.

Written By – Manvendra Singh Manvendra Singh

When you turn on your LG monitor, seeing the ‘No Signal’ message can be frustrating.

This usually means there is a connectivity issue between your monitor and computer.

Don’t worry – in most cases; this can be fixed with some simple troubleshooting steps.

Quick Answer:

To fix an LG monitor with no signal, first ensure all cables are securely connected and the correct input source is selected; then, try restarting both the monitor and connected device. If the issue persists, test with another device or cable to pinpoint the problem.

Fix: LG Monitor No Signal (Step By Step)

What Causes the ‘No Signal’ Message on an LG Monitor?

There are a few potential causes for the ‘No Signal’ error message:

1. Loose or faulty video cable connection

Ensure the video cable from your computer to the monitor is securely plugged in at both ends.

2. Try using a different video cable if possible.

Incorrect input source selected on the monitor – Your LG monitor may have multiple input sources like HDMI, DisplayPort, DVI, etc.

Make sure the correct input is selected on the monitor menu to match the video connection from your PC.

3. Graphics card issues

Problems with your graphics card’s drivers or settings can prevent a signal from reaching the monitor.

Try updating your graphics drivers to the latest version.

3. Power issues

You may see the no signal message if the monitor is not receiving consistent, uninterrupted power.

Check that the monitor is plugged into a working outlet and is turned on.

5. Faulty monitor

If you’ve tried other troubleshooting tips with no luck, the monitor may have developed a fault.

Contact LG customer support for further assistance.

Step-by-Step Guide to Fixing an LG Monitor With No Signal

Follow these steps to resolve the no-signal issue on your LG monitor:

1. Check Video Cable Connections

Ensure the video cable from your computer to the LG monitor is firmly plugged in at both ends.

Secure the cable connection using the screws on the cable ends for a tighter fit.

Try connecting a different video cable to rule out a faulty cable.

Standard video cables used for monitors include HDMI, DisplayPort, DVI and VGA.

2. Confirm Input Source On Monitor Menu

Check that the input source selected on your LG monitor’s on-screen menu matches the video connection type from your computer.

For example, the input source must be set to HDMI if you use an HDMI cable.

Refer to your monitor’s manual for instructions on accessing the input source settings.

3. Update Graphics Drivers

Outdated graphics drivers can sometimes cause connectivity issues with monitors.

Visit the website of your computer’s graphics card manufacturer to download and install the latest driver version.

For example, NVIDIA and AMD have drivers available for their graphics cards. Restart your computer after updating the graphics drivers.

4. Power Cycle the Monitor and PC

If the no signal issue persists, try power cycling the monitor and connecting the computer.

Turn off both devices and unplug their power cables for 2-3 minutes.

This resets the monitor and computer hardware and clears any software glitches.

Plug the power cables back in and turn the monitor and PC on to check for a signal.

5. Try a Different Video Cable

A faulty video cable could cause signal loss between the monitor and the computer.

If possible, swap out the current video cable with a spare cable that works correctly.

Using a different cable that connects properly will indicate the original cable needs replacing.

6. Connect the Monitor To Another Source

To determine whether the problem lies with the monitor or computer system, connect the LG monitor to another output source like a gaming console or DVD player using the appropriate cable.

If the monitor displays appropriately, then the computer’s video output is likely causing the issue.

7. Reset Monitor to Factory Settings

Resetting your LG monitor to factory default settings can clear up software and menu errors that may interfere with the video signal.

Refer to your monitor’s manual for the factory reset procedure specific to your model. This should restore proper video connectivity.

8. Test Monitor on Another Computer

If the monitor works with another video source, but your computer still doesn’t display correctly, plug the monitor into another working computer if possible.

This will indicate whether the problem lies with the monitor or your PC’s video output.

9. Contact LG Support

If you’ve tried all other troubleshooting tips with no success, it’s time to contact LG customer support.

They can help diagnose whether the monitor needs replacement under warranty in case of hardware failure.

Contact LG support by phone or online chat for assistance.

Frequently Asked Questions

Ques 1: Why does my LG monitor sometimes say “No Signal” when I turn on my computer?

Ans: This usually means a connectivity problem between your computer and monitor.

Causes include loose video cables, incorrect input settings, outdated graphics drivers, and power issues.

Ques 2: What cables can I connect an LG monitor to my PC?

Ans: Common cables are HDMI, DisplayPort, DVI, and VGA. Use a cable compatible with your monitor and graphics card outputs. HDMI and DisplayPort support higher resolutions.

Ques 3: Can a video cable adapter fix the no-signal issue on my LG monitor?

Ans: Adapters can sometimes improve connectivity problems. For example, converting an HDMI cable to work with a DVI port.

However, passive adapters have limitations, so connect a direct cable if possible.

Ques 4: My LG monitor says no signal after I installed new graphics card drivers. Help!

Ans: Newer graphics card drivers can occasionally cause monitor connectivity problems.

Try rolling back or updating to a newer driver version. Also, power cycle both the monitor and PC after installing new drivers.

Ques 5: How do I change the input source on my LG monitor when troubleshooting with no signal?

Ans: Press the joystick button on the bottom of the monitor to open the On Screen Display menu.

Under Input, select the correct input source, such as HDMI 1, DisplayPort, etc., based on your video cable connection.

Ques 6: Can faulty monitor settings cause the LG monitor no signal error?

Ans: Correctly monitoring settings like resolution can prevent a proper signal.

Try resetting the monitor to factory default settings in the onboard menu to restore appropriate video connectivity.

I hope this detailed guide helps resolve your LG monitor’s ‘no signal’ issues quickly. Please let me know if you have any other questions!

Share your love
Manvendra Singh
Manvendra Singh

Hi, I am John Williams. Editor-in-chief of the website Here I write about PC technology & Guides.